1000BASE-EZX SFP 1550nm 120km DOM LC SMF Fiber Optic SFP Module
Product Spotlights
Hot pluggable
Bit support fro rate m 16G to 25Gbps
850nm VCSEL laser source
PIN photodiode with TIA
Operating environment temperature 0 ~ 70℃
IEC 60825-1 Class 1/CDRH Class 1 laser eye safe
SFP+ housing with enhanced EMI shielding
Single 3.3V power supply
Programmable EEPROM for serial identification
Diagnostic features per SFF-8472 “Diagnostic Monitoring Interface for Optical Transceivers”
Real time monitoring of: Transmitted optical power; Received optical power; Laser bias current; Temperature; Supply voltage
IEC 60825-1 Class 1/CDRH Class 1 laser eye safe
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Differential data input swing | VIN,PP | 300 | | 1800 | mVpp | 1 |
| Tx Disable Input-High | VIH | 2.0 | | Vcc+0.3 | V | |
| Tx Disable Input-Low | VIL | 0 | | 0.8 | V | |
| Tx Fault Output-High | VOH | 2.0 | | Vcc+0.3 | V | 2 |
| Tx Fault Output-Low | VOL | 0 | | 0.8 | V | 2 |
| Input differential impedance | Rin | | 100 | | Ω | |
| Receiver |
| Differential data output swing | Vout,pp | 400 | | 1000 | mVpp | 3 |
| Rx LOS Output-High | VROH | 2.0 | | Vcc+0.3 | V | 2 |
| Rx LOS Output-Low | VROL | 0 | | 0.8 | V | 2 |
Notes:
1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.
2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.
3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter |
| Operating Wavelength | λ | 1530 | 1550 | 1565 | nm | |
| Ave. output power (Enabled) | PAVE | 0 | | 5 | dBm | 1 |
| Extinction Ratio | ER | 9 | | | dB | 1 |
| Side mode Suppression Ratio | SMSR | 30 | | | dB | |
| RMS spectral width | Δλ | | | 1 | nm | |
| Rise/Fall time (20%~80%) | Tr/Tf | | | 0.26 | ns | 2 |
| Output Optical Eye | Compliant with IEEE802.3 z (class 1 aser safety) |
| Receiver |
| Operating Wavelength | λ | 1260 | | 1610 | nm | |
| Receiver Sensitivity | PSEN1 | | | -32 | dBm | 3 |
| Overload | PAVE | -7 | | | dBm | 3 |
| LOS Assert | Pa | -45 | | | dBm | |
| LOS De-assert | Pd | | | -34 | dBm | |
| LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
1. Measured at 1.25Gb/s with PRBS 2 223 – 1NRZ test pattern.
2. Unfiltered, measured with a PRBS223 – 1 test pattern @1.25Gbps
3. Measured at 1.25Gb/s with PRBS 223 – 1 NRZ test pattern for BER < 1x10-12
Applications
● Gigabit Ethernet
● Fiber Channel
● Router/Server interface
● Other optical transmission systems
FAQ
Q: Are you trading company or manufacturer?
A: We are original manufacturer. We can do OEM/ODM business.Our company mainly produces optical fiber products.
Q: How long is your delivery time?
A: Group buying delivery time: 30-60 days; General delivery time: 20 days.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q: What is the warranty ?
A: The free warranty is one year from the day of Commissioning qualified.If there is any fault for our products within the free warranty period, we will repair it and change the fault assembly for free.
Product Tags:
|
|
1000BASE-EZX SFP DOM LC SMF Fiber Optic SFP Module 1550nm 120km Images
|
